IKO Armourbase Pro Plus Underlayment

Armourbase Pro Plus Underlayment - Armourbase Pro Plus Underlayment
Armourbase Pro Plus Underlayment
Colour

IKO Armourbase Pro Plus Underlayment

On all pitches, IKO recommends that an underlayment must be used underneath the roof shingles.
This is the perfect underlayment in combination with IKO Roof Shingles and low sloped roofs.

IKO Armourbase Pro PLUS has all the features of the Armourbase PRO underlayment and goes even a step further…

Product data

 

Dimensions (l x w):  30 x 1 m
Roof Coverage: 30 m²
Thickness: 0,5 mm
Weight / roll: 11,5 kg - 33 pcs/pallet
Tensile length (EN 13859-1): 400 N / 50 mm
Tensile width (EN 12311-1):  300 N / 50 mm
Elongation length (EN 12311-1): 40 %
Elongation width (EN 12311-1): 50 %
Cold flex lower surface (EN 1109): - 40°C

Downloads

Datasheet file
Application instruction file
Other documents

IKO Armourbase Pro PLUS has all the features of the Armourbase PRO underlayment and goes even a step further…

IKO Armourbase Pro PLUS is a modern and flexible bituminous roof underlayment with bituminous strips for adhesion of overlapping.
Thanks to these self-adhesive overlaps , one does NOT have to overlap by 50% at low slope (15-20°):
in other words saving money and time!

This also creates an increased protection against the risk of water infiltration along the area of mechanical fixing.

Armourbase Pro Plus Underlayment
Armourbase Pro Plus Underlayment
Armourbase Pro Plus Underlayment
Armourbase Pro Plus Underlayment

Application instructions

Install as flat as possible to prevent unevenness from being projected in the shingle surface. Install parallel to the eaves.

Slopes 9,5°- 20°

use about 80% less material or save more than 40% of your costs compared to the 50 cm overlapping method with Eco and Pro and use IKO Armourbase Pro PLUS.
Unique product in the underlayment range!

Slopes 21°- 85°
The entire roof deck should be covered with IKO Armourbase underlay or an approved shingle underlay.
The underlay should be installed parallel to the eaves with a min. 10 cm horizontal lap and 15 cm end laps.
On all IKO Armourbase underlayments there are 10 cm lines on the rolls for easier overlapping.
Secure the underlay with only enough nails to hold it in place.